Juki LK1900C Bartacking Sewing Machine
Easier alignment of sewing positions
The “built-in LED marking light” facilitates positioning of bartacking to reduce unnecessary operation for placing the fabric. The irradiation width of the marking light is adjustable. Some types of the work clamp foot may hide the irradiated light.
Movable eye guard device
The movable eye guard device protects eyes only during sewing. When the sewing machine is at rest, the eye guard automatically goes up to provide a clear view of the needle entry area, thereby allowing the operator to place the fabric smoothly.
Standard LCD panel / Control box integrated with the machine head
The control box integrated with the machine head, originally designed by JUKI, is adopted. The number of standard patterns is 100. As many as 999 patterns (500,000 stitches) can be stored in memory. The new upright type operation panel is installed on the side face of the machine head to allow the operator to operate the machine without averting his/her eyes, during sewing, from the bartack being sewn. In addition, the table surface can be used widely. The operation panel can also be installed on the table as before.
Two-way data communication function for sewing machine data using an NFC terminal
The standard LCD panel is provided as standard with a USBport to facilitate data management between sewing machines and update of software. If you additionally use the optional NFC terminal, bidirectional data communication is enabled with a commercially-available Android terminal in a non-contact manner. This enables quick sharing of pre-set sewing data with other sewing machines to reduce the time required for set-up changing
Eyelet buttonhole bartacking (LK-1901C)
Dedicated bartacking machine for eyelet buttonholes. Three different sewing patterns are available to allow the sewing size to be changed with ease. The machine performs bartacking with the right and left parallel portions of the eyelet buttonhole drawn near to one another after the buttonhole is clamped under the work clamp foot, thereby finishing highly durable and well-tensed eyelet buttonholes. The material drawing amount can be adjusted to 3 mm at maximum. The material drawing mechanism can be switched ON/OFF in accordance with the setting of the memory switch.
Belt-loop attaching (LK-1902C)
Dedicated bartacking machine for attaching belt loops. The optimum number of stitches and sewing size can be quickly selected in accordance with the belt loop width, and six different straight line tacking patterns are provided as standard. Once you register preferred patterns to the pattern keys, you can call and/or change the target pattern by a simple touch of the relevant pattern key.
